Dell Inspiron N7110 - Replacing the Hot-Key Board

38 Hot-Key Board
Replacing the Hot-Key Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the screw hole on the hot-key board with the screw hole on the
palm-rest assembly and replace the screw.
3 Adhere the hot-key board cable to the palm-rest assembly.
4 Turn the palm-rest assembly over.
5 Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 35).
6 Replace the keyboard (see "Replacing the Keyboard" on page 29).
1 hot-key board cable 2 hot-key board
3 screw
3
2
1
book.book Page 38 Friday, April 13, 2012 2:02 PM