34 Palm-Rest Assembly
8
Using a plastic scribe, carefully pry out the palm-rest assembly along the
rear edge and then ease the palm-rest assembly from the computer base.
9
Lift the palm-rest assembly off the computer base.
10
Turn the palm-rest assembly over.
11
Remove the hot-key board (see "Removing the Hot-Key Board" on
page 37).
12
Remove the power-button board (see "Removing the Power-Button Board"
on page 41).
1 plastic scribe 2 palm-rest assembly
book.book Page 34 Friday, April 13, 2012 2:02 PM
To Next Page
Loading...
