Installing the Optical Drive
1. Place the optical drive on to the computer.
2. Tighten the screws that secure the optical drive to the computer.
3. Install:
a. Hard Drive
b. Battery
4. Follow the procedures in After Working Inside Your computer
Removing the Bottom Cover
1. Follow the procedures in Before Working Inside Your Computer
2. Remove:
a. Battery
b. Hard Drive
c. Optical Drive
3. Perform the following steps as shown in the illustration:
a. Unlock the I/O latch door [1].
b. Lift the latch door upward to open it [3].
c. Remove the screw that secure the bottom cover to the computer chasis [3].
10
To Next Page
Loading...
