Installing the System Board
1. Place the system board on the computer.
2. Tighten the screws that secure the system board to the computer.
3. Connect the mother board cable to the computer
4. Tighten the screws that secure the connector to the computer chassis.
5. Slide the drive into its place on the computer.
6. Close the drive bay.
7. Install:
a. Bottom Cover
b. Optical Drive
c. Hard Drive
d. WLAN Card
e. WWAN Card
f. I/O Board
g. Battery
8. Follow the procedures in After Working Inside Your computer
35
To Next Page
Loading...
