a battery
b base cover
5 Follow the procedure in After working inside your computer.
Removing the SSD with holder
For models shipped with 2230 SSDs, the SSD requires installation of a specic holder over the SSD for securing the SSD in place.
1 Follow the procedure in Before working inside your computer.
2 Remove the :
a base cover
b battery
3 To remove the SSD with holder:
a Remove the single (M2*3) screw that secures the SSD holder to the system [1].
b Slide and lift the SSD holder with SSD from the system [2].
Installing the SSD with holder
1 Insert the SSD card with holder into the connector on the system.
2 Replace the single (M2*3) screw to secure the SSD holder to the system.
3 Install the :
a battery
12
Removing and installing components