b battery
c memory module
d WLAN card
e WWAN card (optional)
f display assembly
g display bezel
h display hinge cover
i display panel
j display hinge
k display cable
l camera
The display back cover assembly is the remaining component, after removing all the components.
Installing the display back cover assembly - non-touch
1 Place the display back cover assembly on a at surface.
2 Install the:
a camera
b display cable
c display hinge
d display panel
e display hinge cover
f display bezel
g display assembly
h WLAN card
i WWAN card (optional)
j memory module
k battery
l base cover
3 Follow the procedure in After working inside your computer.
46
Removing and installing components
To Next Page
Loading...
