3 To remove the memory module:
a Pry the clips securing the memory module until the memory module pops-up [1].
b Lift the memory module away from the connector [2].
Installing the memory module
1 Insert the memory module into the memory connector at a 30 degree angle until the contacts are fully seated into the slot. Then,
depress the module until the clips secure the memory module.
2 Install the :
a battery
b base cover
3 Follow the procedure in After working inside your computer.
Keyboard
Removing keyboard lattice
1 Follow the procedure in Before working inside your computer.
2 Pry the keyboard lattice from the edges [1] and lift the lattice away from the system [2].
NOTE
: Gently pull or lift keyboard lattice in clockwise or anticlockwise direction to avoid breakage.
20 Removing and installing components
To Next Page
Loading...
