j hard drive assembly
k memory module
l battery
m base cover
n SIM card
11 Follow the procedure in After working inside your computer.
Display assembly
Removing display assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c memory module
d WLAN card
e WWAN card (optional)
3 To disconnect the display cable:
a Release the WLAN and WWAN cables from the routing channels [1].
b Remove the single (M2x3) screw that secures the display cable bracket in place [2].
c Remove the display cable bracket that secures the display cable from the system [3].
d Disconnect the display cable from the connector on the system board [4].
Removing and installing components
35
To Next Page
Loading...
