Installing display hinge cover - non-touch
1 Place the display hinge cover on the display hinge.
2 Replace the (M2.5*3) screw to secure the display hinge cover to the display hinge.
3 Repeat step 1 and step 2 to install the other display hinge cover.
4 Install the:
a display bezel
b display assembly
c WLAN card
d WWAN card (optional)
e memory module
f battery
g base cover
5 Follow the procedure in After working inside your computer.
Display hinges
Removing display hinge - non-touch
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c memory module
d WLAN card
e WWAN card (optional)
f display hinge cover
g display assembly
h display bezel
3 To remove the display hinge:
a Remove the 6 (M2.5x3) screws that secure the display hinge to the display assembly [1].
b Lift the display hinge away from the display assembly [2].
c Repeat step a and step b to remove the other display hinge.
Removing and installing components
39
To Next Page
Loading...
