Hard drive
Removing hard drive
1 Follow the procedure in Before working inside your computer.
2 Remove the :
a battery
b base cover
3 To remove the hard drive:
a Disconnect the hard drive cable from the connector on the system board [1].
b Remove the 4 (M2 x 5.4) screws that secure the hard drive assembly to the system [2].
c Remove the hard drive assembly from the system.
d Remove the hard drive cable.
e Remove the 4 (M3x3) screws that secure the hard drive brackets in place.
f Lift the hard drive bracket from the hard drive.
Installing hard drive
1 Insert the hard drive into the hard drive bracket.
2 Replace the screws to secure the hard drive bracket to the hard drive.
14
Removing and installing components
To Next Page
Loading...
