d Remove the display panel.
Installing display panel - non-touch
1 Connect the display cable to the connector and ax the adhesive strip.
2 Ax the conductive tape to secure the display cable.
3 Replace the display panel to align with the screw holders on the display assembly.
4 Replace the 2 (M2*2) screws to secure the display panel to the display assembly.
5 Install the:
a display bezel
b display assembly
c WLAN card
d WWAN card (optional)
e battery
f base cover
6 Follow the procedure in After working inside your computer.
42
Removing and installing components
To Next Page
Loading...
