Option Description
TPM 2.0 Security
Allows you to enable or disable the Trusted Platform Module (TPM) during POST.
The options are:
• TPM On—Default
• Clear
• PPI Bypass for Enable Commands—Default
• Attestation Enable—Default
• PPI Bypass for Disable Commands
• Key Storage Enable—Default
• PPI Bypass for Clear Commands
• SHA-256—Default
Click any one of the following:
• Enabled—Default
• Disabled
Computrace (R)
Allows you to activate or disable the optional Computrace software.
The options are:
• Deactivate
• Disable
• Activate—Default
CPU XD Support
Allows you to enable the Execute Disable mode of the processor.
• Enable CPU XD Support
This option is set by default.
OROM Keyboard Access
Allows you to determine whether users are able to enter the Option ROM Conguration screens via
hotkeys during boot. The options are:
Click one of the following options:
• Enabled—Default
• One Time Enable
• Disabled
Admin Setup Lockout
Allows you to prevent users from entering Setup when an administrator password is set.
• Enable Admin Setup Lockout
This option is not set by default.
Master Password Lockout
Allows you to disable master password support.
• Enable Master Password Lockout
This option is not set by default.
NOTE: Hard Disk password should be cleared before the settings can be changed.
SMM Security Mitigation
Allows you to enable or disable additional UEFI SMM Security Mitigation protection.
• SMM Security Mitigation
This option is not set by default.
68 System Setup
To Next Page
Loading...
