CAUTION: Do not power o the system during the BIOS update process. Powering o the system could make the system fail to
boot.
1 From a power o state, insert the USB key where you copied the ash into a USB port of the system .
2 Power on the system and press the F12 key to access the One-Time Boot Menu, Highlight BIOS Flash Update using the arrow keys
then press
Enter.
3 The Bios ash menu will open then click the browse button.
4 The E5450A14.exe le is shown as an example in the following screenshot. The actual le name may vary.
78
System Setup
To Next Page
Loading...
