• Using Bootable Image
Command Prompt
To run Command | Configure commands:
1. Click Start → All Program → Dell → Command Configure → Command Configure Command Prompt.
NOTE: If you are using Microsoft Windows Vista operating system or later, right-click Command | Configure
Command Prompt and select Run as administrator.
2.
Navigate to the x86 or x86_64 directory depending on the architecture of the operating system.
3. Run the Command | Configure commands.
Bootable Image
To run Command | Configure commands:
1. Copy Dell Command | Configure with the International Organization for Standardization (ISO) image to a Compact disc (CD). For
more information, see Dell Command | Configure Installation Guide available at https://Dell.com/Command .
2. Boot the system that you want to configure from the CD.
3. Navigate to the Command Configure\x86 or Command Configure\x86_64 directory.
4. Run the Command | Configure commands.
Intel HD Graphics drivers
Verify if the Intel HD Graphics drivers are already installed in the laptop.
Table 23. Intel HD Graphics drivers
Before installation After installation
60 Technology and components
To Next Page
Loading...
