PCIe Heatsink Fan Assembly
Removing the PCIe Heatsink fan assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) Batteries
b) Bottom chassis cover
3. Disconnect the fan cable [1], loosen the four 'M2*3' screws from fan case [2].
4. Loosen the seven 'M2.5*5' screws [1] from heat sink pipe and remove the PCIe heatsink assembly from the computer [2].
5. Remove the four M2*3 screws [1] to separate the heatsink from the fan [2].
96
Removing and installing components
To Next Page
Loading...
