Installing camera
1 Insert the camera into the slot on the display back cover.
2 Connect the camera cable to the connector on the camera module.
3 Install the :
a display panel
b display bezel
c display assembly
d display hinge cover
e WLAN card
f WWAN card (optional)
g memory module
h battery
i base cover
4 Follow the procedure in After working inside your computer.
Display hinges
Removing display hinge
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card (optional)
e display hinge cover
f display assembly
g display bezel
3 To remove the display hinge:
a Remove the 3 (M2.5x3) screws that secure the display hinge to the display assembly [1].
b Lift the display hinge from the display assembly [2].
c Repeat step a and step b to remove the other display hinge.
58
Disassembly and reassembly
To Next Page
Loading...
