Dell Latitude 5491 - Installing Display Hinge; Display Back Cover Assembly; Removing the Display Back Cover Assembly

Installing display hinge
1 Place the display hinge on the display assembly.
2 Replace the 3 (M2.5x3) screws to secure the display hinge to the display assembly.
3 Repeat step 1 and step 2 to install the other display hinge.
4 Install the:
a display bezel
b display assembly
c display hinge cover
d WLAN card
e WWAN card (optional)
f battery
g base cover
5 Follow the procedure in After working inside your computer.
Display back cover assembly
Removing the display back cover assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
Disassembly and reassembly
59