9. Install the:
a. SIM card tray
b. microSD card
10. Follow the procedure in After working inside your tablet.
Solid-state drive
Removing the solid-state drive
Steps
1. Follow the procedure in Before working inside your tablet.
2. Remove the:
a. microSD card
b. SIM card tray
c. display panel assembly
3. To remove the solid-state drive bracket:
NOTE: SIM card slot is available only on tablets with WWAN module.
a. Remove the M2x2.5 screw that secures the bracket to the solid-state drive [1].
Disassembly and reassembly
27