Dell Latitude 7210 2-in-1 - I;O Board; Removing I;O Board

b. Heat-sink assembly
c. Rear-facing camera
d. display panel
e. microSD card
f. SIM card tray
g. battery
6. Follow the procedure in after working inside your tablet.
I/O Board
Removing I/O board
Steps
1. Follow the procedure in Before working inside your tablet.
2. Remove the SD Memory Card and display panel.
3. Remove the cable from the system board, and peel off the adhesive tape to remove the I/O board
Figure 2. Removing the cable
74
Disassembly and reassembly