3. Replace the M2x2.5 screws that secures the bracket to the solid-state drive.
4. Install the:
a. display panel assembly
b. microSD card
c. SIM card tray
5. Follow the procedure in After working inside your tablet.
WLAN card
Removing the WLAN card
Steps
1. Follow the procedure in Before working inside your tablet.
2. Remove the:
a. microSD card
b. SIM card tray
c. display panel assembly
3. Loosen the M2x3.5 screws that secure the WLAN bracket to the WLAN card [1].
4. Remove the WLAN bracket [2].
5. Disconnect the antenna cables from the WLAN card [3].
Disassembly and reassembly
31