6. Replace the:
a. display panel assembly
b. microSD card
c. SIM card tray
7. Follow the procedure in After working inside your tablet.
Power Button Board
Removing the power-button board
Steps
1. Follow the procedure in Before working inside your tablet.
2. Remove the:
a. microSD card
b. SIM card tray
c. display panel assembly
d. heat-sink assembly
3. Unroute the WLAN antenna cables from the routing guides on the computer [1].
4. Open the latch and disconnect the power-button board FPC from the connector on the system board [2].
5. Peel the power-button board FPC from the computer [1].
6. Open the latch and disconnect the fingerprint reader FFC from the power-button board [2].
Disassembly and reassembly
63
To Next Page
Loading...
