Dell Latitude 7210 2-in-1 - Docking Board Connector; Removing the Docking Connector

b. WWAN main antenna module
c. Heat sink assembly
d. Rear-facing camera
e. display panel
f. microSD card
g. SIM card tray
h. battery
5. Follow the procedure in After working inside your tablet.
Docking board connector
Removing the docking connector
Steps
1. Follow the procedure in Before working inside your tablet.
2. Remove the:
a. microSD card
b. SIM card tray
c. display panel assembly
3. To remove the docking connector:
a. Open the latch and disconnect the docking connector FPC from the system board [1].
b. Peel the docking connector FPC from the computer [2].
c. Remove the M2x2.5 screws that secure the docking-board bracket to the docking board [1].
d. Lift the docking-board bracket away from the docking board [2].
Disassembly and reassembly
59