Dell Latitude 7424 Rugged Extreme - Page 102

3. Connect the EDP cable to the system board [1] place the EDP bracket [2] on the connector.
4. Install the two 'M2*3' screws [3] securing the EDP connector to the system board and rethread the antennae cables [4].
5. Install the:
a. Hinge covers
b. Heatsink
c. GPS card
d. WLAN card
e. WWAN card
f. PCIe heatsink assembly
g. Docking port assembly
h. Bottom chassis cover
i. Batteries
6. Follow the procedure in After working inside your computer.
102
Removing and installing components