Left I/O board
Removing the Left I/O daughterboard
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Batteries
b. Bottom chassis cover
c. PCIe Heatsink fan assembly
d. Battery bay
3. Peel off the inductive tape [1] on the left I/O daughterboard FPC connection, disconnect it from the system board [2].
4. Pass the FPC cable through the wall bridge [3] and disconnect the speaker cable from the left I/O daughterboard [4].
5. Loosen the two 'M2*5' screws [1] and lift the Left I/O daughterboard from the computer [2].
Removing and installing components
113
To Next Page
Loading...
