3. Install the:
a. Batteries
b. Bottom chassis cover
4. Follow the procedure in After working inside your computer.
Global Positioning System (GPS)
Removing the GPS module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Batteries
b. Bottom chassis cover
3. Peel off the inductive tape on the GPS FPC connector [1].
4. Disconnect the GPS FPC connector [2] and antennae cable from the GPS module [3].
5. Remove the three 'M2.5*5' screws [4] and lift the GPS module from the system board [5].
78
Removing and installing components