Dell Latitude 7424 Rugged Extreme - Installing the Keyboard

6. Peel-off the tape on the keyboard and back-light FPC [1] and disconnect it from the system board [2].
NOTE: Tweezers might be required to access the keyboard and back-light FPC connectors on the system board.
7. Separate the keyboard from the system [3].
Installing the Keyboard
1. Install the keyboard [1] and connect the keyboard and back-light FPC to the system board [2].
2. Secure keyboard and back-light FPC connections using an insulation tape [3].
Removing and installing components
73