2. Install the:
a. Bottom chassis cover
b. Batteries
3. Follow the procedure in After working inside your computer.
PCIe Heatsink Fan Assembly
Removing the PCIe Heatsink fan assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Batteries
b. Bottom chassis cover
3. Remove the rubber gourmet [1] and remove the four 'M2*3' screws on the SSD cage.
4. Remove the four 'M2.5*5' screws on the fan and single 'M2*3' screw from the dock pedestal [2].
5. Disconnect the fan cable [3] and lift the PCIe heatsink fan assembly [4] from the computer.
Removing and installing components
83