6.
CAUTION:
The following epoxy screw locations will require additional focus. These screws are difficult
to remove and there may be damage during the removal process. To prevent damage to the screws and
surrounding plastics, please use the correct screwdriver for each screw type.
Loosen the four epoxy screws on hinges [1] and four screws behind the hinges to separate the LCD assembly from the
computer [2].
Installing the Display Assembly
1. Tighten the four epoxy screws on left [1] and on the right [2] side and four epoxy screws behind the hinges.
2. Close the lid [3].
Removing and installing components
101
To Next Page
Loading...
