10. Remove the left speaker.
11. Remove the right speaker.
12. Remove the WLAN antenna module.
13. Remove the I/O daughter board.
14. Remove the power button with fingerprint reader assembly (for systems shipped with a fingerprint reader).
15. Remove the system board.
16. Remove the USH daughter board.
17. Remove the WWAN main antenna module.
About this task
The following images indicate the location of the palm-rest assembly and provide a visual representation of the removal
procedure.
Installing the palm-rest assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the palm-rest assembly and provide a visual representation of the removal
procedure.
56
Removing and installing components
To Next Page
Loading...
