4. Perform the following steps to remove the system fan from the computer:
a. Remove the screws that secure the system fan to the computer [1].
b. Remove the system fan from the computer [2].
Installing the System Fan
1. Place the system fan into its slot on the computer.
2. Tighten the screws to secure the system fan to the computer.
3. Connect the system-fan cable to its connector on the system board.
4. Install the:
a. palmrest
b. keyboard
c. keyboard trim
d. battery
e. base cover
5. Follow the procedures in After Working Inside Your Computer.
36
To Next Page
Loading...
