4. Perform the following steps to remove the speakers from the computer:
a. Remove the screws that secure the speakers to the computer [1].
b. Remove the speakers from the computer [2].
Installing the Speakers
1. Place the speakers into their slots on the computer.
2. Tighten the screws to secure the speakers to the computer.
3. Route the speaker cables through their routing channels.
4. Connect the speaker cable to its connector on the system board.
5. Install the:
a. system fan
b. display assembly
c. display-hinge brackets
d. palmrest
e. keyboard
f. keyboard trim
g. hard-drive assembly
h. memory
i. battery
j. base cover
6. Follow the procedures in After Working Inside Your Computer.
42
To Next Page
Loading...
