4. Push the SIM card tray into the slot until it clicks into place.
Removing the Subscriber Identification Module SIM card
CAUTION: Removing the SIM card when the computer is on may cause data loss or damage the card. Ensure
your computer is turned off or the network connections are disabled.
1. Insert a paperclip or a SIM card removal tool into the pinhole on the SIM card tray.
2. Remove the SIM card from the SIM card tray.
3. Push the SIM card tray into the slot until it clicks into place.
Base cover
Removing the base cover
1. Follow the procedure in Before working inside your computer.
2. To remove the base cover:
a. Loosen the screws that secure the base cover to the computer [1].
b. Lift the base cover from the edge and remove it from the computer [2, 3].
NOTE: You may need a plastic scribe to lift the base cover from the edges.
Disassembly and reassembly 11
To Next Page
Loading...
