Option Description
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed,
Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable,
and 64-Bit technology.
● Device Information: Displays Primary Hard Drive, SATA-0, M.2PCIe SSD-0, Dock eSATA Device, LOM
MAC Address, Video Controller, Video BIOS Version, Video Memory, Panel Type, Native Resolution,
Audio Controller, WiFi Device, WiGig Device, Cellular Device, Bluetooth Device.
Battery
Information
Displays the battery status and the type of AC adapter connected to the computer.
Boot Sequence
Boot Sequence Allows you to change the order in which the computer attempts to find an
operating system. The options are:
● Windows Boot Manager
● UEFI: Hard drive details
Boot List Options Allows you to change the boot list option:
● Legacy
● UEFI (enabled by default)
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is
disabled.
Date/Time Allows you to change the date and time.
System Configuration screen options
Option
Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
● Disabled
● Enabled
● Enabled w/PXE: This option is enabled by default.
Parallel Port Allows you to configure the parallel port on the docking station. The options are:
● Disabled
● AT: This option is enabled by default.
● PS2
● ECP
Serial Port Allows you to configure the integrated serial port. The options are:
● Disabled
● COM1: This option is enabled by default.
● COM2
● COM3
● COM4
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
● AHCI
● RAID On: This option is enabled by default.
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
● SATA-0
● SATA-1
● SATA-2
● M.2 PCIe SSD-0
SMART
Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
BIOS setup 45
To Next Page
Loading...
