Dell Latitude E5470 - M.2 and PCIe SSD Procedures

Solid State Drive
Removing the optional M.2 Solid State Drive SSD
If the system is shipped with M.2 SSD perform the following steps.
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
3. To remove the SSD:
a. Remove the screw that secures the SSD to the computer [1].
b. Slide and lift the SSD from the computer [2].
Installing the optional M.2 SSD
If the system is shipped with M.2 SSD perform the following steps.
1. Insert the SSD into the connector on the computer.
2. Tighten the screw to secure the SSD to the computer.
3. Install the:
a. battery
b. base cover
4. Follow the procedure in After working inside your computer.
Removing the optional PCIe SSD
If the system is shipped with PCIe SSD perform the following steps.
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
3. To remove the PCIe SSD:
a. Remove the screws that secure the SSD bracket to the SSD [1].
b. Remove the SSD bracket [2].
c. Remove the SSD from the computer [3].
16
Disassembly and reassembly