Disassembly and reassembly
Topics:
• Recommended tools
•
Subscriber Identification Module (SIM) card
• Base cover
• Battery
• Hard drive
• Solid State Drive
• Memory modules
• WLAN card
• WWAN card
• Docking frame
• Touchpad
• Power connector port
• Keyboard lattice and Keyboard
• Display assembly
• Display hinges
• SmartCard module
• Fingerprint reader
• LED board
• Heat sink
• Speaker
• System board
• Coin-cell battery
• Palm rest
Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Small plastic scribe
Subscriber Identification Module (SIM) card
Installing the Subscriber Identification Module SIM card
1. Follow the procedure in Before working inside your computer.
2. Insert a paperclip or a SIM card removal tool into the pinhole to remove the SIM card tray [1].
3. Place the SIM card on the SIM card tray [2].
2
10 Disassembly and reassembly