Dell Latitude E5470 - Installing Hard Drive into Bracket

4. Remove the screws that secure the hard drive bracket to the hard drive [1] and lift the hard drive from the hard drive
bracket [2].
Installing the hard drive into the hard drive bracket
1. Align the screw holders on the hard drive with the screws on the hard drive bracket.
2. Insert the hard drive into the hard drive bracket.
3. Tighten the screws to secure the hard drive to the hard drive bracket.
4. Install the:
a. hard drive assembly
b. battery
c. base cover
5. Follow the procedure in After working inside your system.
Disassembly and reassembly
15