Dell MR2416 - Product Features

About Your Monitor | 15
Product Features
The Dell MR2416 flat panel medical display has an active matrix, Thin-Film Transistor
(TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features include:
• 60.96 cm (24-inch) viewable area display (measured diagonally).
1920 x 1200 resolution, plus full-screen support for lower resolutions.
• Wide viewing angle to allow viewing from a sitting or standing position, or while
moving from side-to-side.
• Tilt, swivel, height, and rotate adjustment capabilities.
• Removable stand and Video Electronics Standards Association (VESA™) 100 mm
mounting holes for flexible mounting solutions.
• Digital connectivity with DisplayPort and HDMI.
• Equipped with 1 USB upstream port and 2 USB downstream ports.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
• Software and documentation media includes an Information File (INF), Image Color
Matching File (ICM), and product documentation.
• Dell Display Manager Software included (comes in the CD shipped with the
monitor).
• Security lock slot and cable clip.
• Capability to switch from wide aspect to standard aspect ratio while maintaining
the image quality.
• BFR/PVC/CFR-free (Halogen-free) excluding the external cables and power
adapter.
• Meets NFPA 99 leakage current requirements.
• Arsenic-Free glass and Mercury-Free for the panel only.
• 0.5 W standby power when in the sleep mode.
• Energy Gauge shows the energy level being consumed by the monitor in real time.
• Analog backlight dimming control for flicker free display.
• Cleanable design with IP32 rated for front cover glass and back.
• DICOM (Digital Imaging and Communications in Medicine) part-14 GFDS for
accurate grayscale reproducibility. DICOM calibrated luminance at 180 cd/m².
• FDA Class I and medical grade display.
• Integrated backlight sensing for brightness stabilization.
• Hard coat and anti-reflective front cover glass.
• Cable security and management.
• 10-bit LUT and color processing.
• White housing for visible dried blood stains detection.