Safety Information | 7
Intended Use
MR2416 is an LCD display intended used for trained physician or practitioners viewing
medical images and data in hospital or clinic environment.
The device is neither used for life supporting system, surgical procedure system nor
viewing digital mammography images.
Warning
You may get an electric shock if the AC outlet is not grounded properly.
Disconnecting Device
The power cord is the disconnect device for this monitor and is attached to the power
adapter as a plug-in device. To remove all electrical power from the monitor, disconnect
the power cord from the electrical outlet.
General recommendations
• For continued safe use of this monitor, read the safety and operating instructions
before operating the monitor.
• Unplug the AC mains cord to disconnect the mains power.
• Use only the power cord supplied with this monitor.
• Adhere to all warnings on the device and in the operating instructions manual.
Electrical Shock or Fire Hazard
• Connect the AC power cord to a properly grounded power source with the line
frequency and voltage specified on the name plate of the power adapter.
• To reduce the risk of electrical shock, DO NOT remove any covers. Refer servicing
to qualified personnel only.
• Users must not allow SIP/SOPs and the patient to come into contact at the same
time.
Modifications to the unit
No modification of this monitor is allowed.
Type of protection (electrical)
Monitor with external power adapter: Class I equipment.
Explosion Hazard
Do not use this monitor in the presence of flammable materials.
To Next Page
Loading...
