34 System Firmware Version 5.1.0.1
mypubkey
generates two
error messages
After generating DSA & RSA keys,
executing the command "show crypto key
mypubkey" generates the following error
messages:
<187> APR 23 09:09:22 192.168.1.2-1
OSAPI[162603392]: osapi_file.c(657) 426
%% File close failed for descriptor 37
<187> APR 23 09:09:22 192.168.1.2-1
OSAPI[162603392]: osapi_file.c(657) 427
%% File close failed for descriptor 37
There is no impact on the keys themselves.
table does not
match the CLI
ARP table
The Web GUI does not display the
static/local ARP entries. However, once an
external port is linked up some, but not all,
of the Static/local appear in the Web GUI.
All ARP entries are now
shown.
negotiation
process fails at
100mb FD and
The copper ports 1-24 fail on 8024 to
negotiate at 100Mb FD.
8024 copper ports negotiate to
100M FD.
Wrong
information for
current link
status in port
configuration
The current stacking port status does not
display “stacking link up”
The web stack display has
been updated to accurately
reflect the correct information
as well as address some style
issues.
VLAN
membership
change on
interface affects
unrelated
If user changes VLAN membership
configuration on trunk port via the WEB he
loses ports configuration on access ports
and access ports are put into default VLAN.
Issue is resolved.
The dot1qVlanStaticTable is not available
on M8024-k.
the dot1qStaticVlanTable is
implemented for the M8024-k
native vlan
implementation
not compatible
Native vlan implementation is incompatible
with Cisco. Switch will egress native vlan
traffic as tagged and Cisco will drop ingress
tagged native vlan traffic.
Implementation of native vlan
changed to be compatible with
Cisco.
Switch hangs
when user tries
to transfer a file
from the flash to
the server using
Switch hangs and needs a hard reboot.
None – issue is resolved.
To Next Page
Loading...
