Dell Networking N4032 Reference Guide

12 Expansion Modules for Dell Networking Switches
3.1.4 Dell Networking MXL
Figure 5 Dell Networking MXL Blade Switch (10/40G Ethernet) and Available Modules
The Dell Networking MXL supports the same expansion modules as the Dell Networking N40xx and 81xx series rack
mounted switches. Whenever a module is moved from an N40xx/81xx to an MXL or vice versa, a reload of the switch
is required for proper functioning of the module.
3.1.5 Dell Networking M6348
Figure 6 Dell Networking MXL Blade Switch (10/40G Ethernet) and Available Modules
The Networking M6348 has no expansion slots; therefore, it does not support any module. However, the front panel
provides sixteen 10/100/1000Base-T auto-sensing full-duplex RJ-45 ports, two 10G SFP+ ports, and two 10G CX4
ports. There are also 32 internal 1G ports that connect to the servers in the chassis. The stacking ports on the front
panel allow stacking between M6348 switches as well as between M6348 and Dell Networking 7000 series switches.

Dell Networking N4032 Specifications

General

Rack Units	1U
Layer	Layer 3
Manageable	Yes
Stackable	Yes
MAC Address Table Size	32, 000 entries
Jumbo Frame Support	Yes
Jumbo Frame Size	9216 bytes
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C (32°F to 113°F)
Uplink Ports	8 x 10 Gigabit Ethernet 10GBASE-T
Power Supply	Dual, hot-swappable
Operating Humidity	10% to 90% non-condensing