Dell Networking N4032 User Manual

22 Stacking Dell Networking Switches: N4032, N4032F, N4064, N4064F
stack. In the event the new stack member unit being added has a newer firmware version, a downgrade is
also allowed. To prevent the downgrade of the new stack member unit’s firmware, disable the Allow-
Downgrade option on the Master. This allows all new member units to synchronize with the Master only if
the firmware revision of the new members is older than that of the Master. Use the System > Stack
Management > Stack Firmware Synchronization page to view and set these features.
Save the configuration to the Startup-Configuration on the System > File Management > Copy Files page.

Dell Networking N4032 Specifications

General

Rack Units	1U
Layer	Layer 3
Manageable	Yes
Stackable	Yes
MAC Address Table Size	32, 000 entries
Jumbo Frame Support	Yes
Jumbo Frame Size	9216 bytes
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C (32°F to 113°F)
Uplink Ports	8 x 10 Gigabit Ethernet 10GBASE-T
Power Supply	Dual, hot-swappable
Operating Humidity	10% to 90% non-condensing