Dell Networking N4032 User Manual

37 Stacking Dell Networking Switches: N4032, N4032F, N4064, N4064F
After selecting backup for each unit, click Apply.
Go to the System > General > Reset page to reload the switch.
Click Apply to reload all switches in the stack. If the following screen appears, click OK.
Click OK again if this screen appears.

Dell Networking N4032 Specifications

General

Rack Units	1U
Layer	Layer 3
Manageable	Yes
Stackable	Yes
MAC Address Table Size	32, 000 entries
Jumbo Frame Support	Yes
Jumbo Frame Size	9216 bytes
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C (32°F to 113°F)
Uplink Ports	8 x 10 Gigabit Ethernet 10GBASE-T
Power Supply	Dual, hot-swappable
Operating Humidity	10% to 90% non-condensing