4. Install the:
a. Front bezel
b. Side cover
5. Follow the procedure in After working inside your computer.
Removing the 2.5–inch hard drive assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel door.
4. To remove the hard drive assembly:
a. Disconnect the hard drive data and power cables from the connectors on the 2.5-inch hard drive [1].
b. Press the blue tabs of the assembly on both sides [2] and pull the hard drive assembly out of the system [3].
24
Removing and installing components
To Next Page
Loading...
