2. Close the front panel door.
3. Install the:
a. Front bezel
b. Side cover
4. Follow the procedure in After Working Inside Your Computer.
Optical drive
Removing optical drive
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel door.
4. To remove the optical drive assembly:
a. Disconnect the optical drive data cable and power cable from the connectors on the optical drive [1].
NOTE:
You may need to unroute the cables from the tabs under the drive cage to allow you to disconnect the cables
from the connectors.
b. Close the front panel door [2].
Removing and installing components
27
To Next Page
Loading...
