d. Pull the release latch forward to close [3].
e. Repeat the steps to install any additional PCIe expansion card.
2. Close the front panel door.
3. Install the:
a. Front bezel
b. Side cover
4. Follow the procedure in After working inside your computer.
Optional VGA module
Removing optional VGA module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel door.
4. Remove the system fan.
5. To remove the optional VGA module:
a. Remove the two (M3X3) screws that secure the optional VGA module to the system.
Removing and installing components
39
To Next Page
Loading...
