Installing side cover
1. To install the side cover:
a. Place the cover on the computer, slide it to align it with the chassis and tighten the captive screws to secure the cover
to the computer [1, 2].
2. Follow the procedure in After working inside your computer.
Bezel
Removing front bezel
1. Follow the procedure in Before working inside your computer.
2. Remove the Side cover.
3. To remove the front bezel:
a. Pry the retention tabs to release the front bezel from the system [1].
b. Rotate the front bezel away from the computer [2] and pull to release the hooks on the front bezel from the front-panel
slots [3].
18
Removing and installing components
To Next Page
Loading...
