4. Close the front panel door.
5. Install the:
a. Front bezel
b. Side cover
6. Follow the procedure in After working inside your computer.
Heatsink assembly
Removing heatsink assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel door.
4. To remove the heatsink assembly:
a. Disconnect the heatsink fan assembly cable from the connector on the system board [1].
b. Loosen the captive screws (4) that secure the heatsink assembly to the system board [2].
NOTE: Remove the screw in the sequential order (1,2,3,4) as printed on the system board.
c. Lift the heatsink assembly away from the computer [3].
Removing and installing components
59
To Next Page
Loading...
