2. Disconnect any telephone or telecommunication lines from the computer.
3. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
4. If applicable, remove the computer stand (for instructions, see the documentation that came with the stand).
5. Remove the computer cover.
l For your mini tower computer, see: Removing the Computer Cover
l For your desktop computer, see: Removing the Computer Cover
Back to Contents Page
NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
To Next Page
Loading...
