Dell OptiPlex 320 - Page 98


4. Attach the power and data cables to the floppy drive.

5. Replace the drive panel by aligning its hinges and rotating it up until it snaps into place.

6. Replace the computer cover (see Replacing the Computer Cover).

7. Enter system setup and use the Diskette Drive option to enable your new floppy drive (see Entering System Setup).

8. Verify that your computer works correctly by running the Dell Diagnostics (see Dell Diagnostics).
CD/DVD Drive



1
floppy drive
2
shoulder screws (4)
3
shoulder screw slots (2)
1
power cable
2
floppy-drive cable
3
floppy-drive connector (FLOPPY)
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before replacing the cover.