Installing processor
1 Align the processor with the socket keys.
CAUTION
: Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into the
socket.
2 Align the pin-1 indicator of the processor with the triangle on the socket.
3 Place the processor on the socket such that the slots on the processor align with the socket keys.
4 Close the processor shield by sliding it under the retention screw.
5 Lower the socket lever and push it under the tab to lock it.
6 Install the heat sink assembly.
7 Close the front panel door.
8 Install the:
a bezel
b cover
9 Follow the procedure in After working inside your computer.
38
Removing and installing components
To Next Page
Loading...
